Sealing Tiles is easy with Bondall Tileguard Tile and Grout Sealer.

Sealing Tiles with Bondall Tile and Grout SealerSealing Tiles

Test on a small inconspicuous area to ensure that the sealer is achieving the desired result, and to ensure it does not discolour the tiles prior to application over the entire area. Before applying, remove any silicone sealant strips and soap build up and clean any mould from the tiles and grout with bleach or Tile and Grout Cleaner. Rinse thoroughly with water, after cleaning. Also remove and patch any loose or missing tile grout and for improved quality, use Bondall Hydrocrete as an additive in the grout. The application area also need to be dry for approximately 12-24 hours before applying Tile and Grout Sealer.

Tile and Grout Sealer will treat approximately 5 square metres depending on the texture, porosity and method of the application.

Application should start from the top of the wall, brushing the sealer liberally over tiles and grout. Finish with the shower or floor base. You’ll nee to ensure that Tile and Grout Sealer is applied thoroughly to all surfaces and allow at least 15 minutes for the first application to react, before repeating the entire area. Allow another 15 minutes for the second application to penetrate then use a dry cloth to wipe off any excess left on the tile surface. Once finished, allow 24 hours before using.